Basic Info.
Certification
GS, ISO, RoHS, CE
Dehumidification Capacity
329
Suitable Temperature
5-38 Degrees Celsius
Transport Package
Wooden Case+ Paper Box
Specification
7200x2550x2600
Product Description
Monolithic pool dehumidification unit, uses the advanced heat pump technology, the swimming pool indoor damp air suction unit, part of indoor air is outside, most after dehumidification was sent to a swimming pool with fresh air indoor, the above process cycle, ultimately achieve the purpose of the swimming pool indoor dehumidification, effectively solve the indoor swimming pool wall condensation, adornment corrosion problems, give the swimmer provides a comfortable environment for swimming.
Control system:
Through the microcomputer automatic control system, all the temperature and humidity data were collected and analyzed to determine the most energy-saving operation mode.The control system integrates all the functional modules needed for dehumidification heat exchangers, and only the necessary parameters are set at the first start-up, so that the whole equipment can maintain efficient, stable and reliable operation throughout the year.
Compressor:
Adopt international famous scroll compressor, high compression efficiency.Cold medium for environmental protection R407C or 410A, the ozone layer of the atmosphere without damage.
Titanium tube pool water condenser:
Built in titanium tube heat exchanger, the excess heat can be recovered and sent to the pool.
Ventilation system:
Use centrifugal fan.The motor adopts international famous brand.
Full fresh air function:
Under certain temperature and humidity conditions, the introduction of outdoor fresh air to participate in the air circulation can achieve the effect of energy saving and increase the oxygen content of the chamber air. | DHP (Multi-function Swimming Pool Dehumidifier Series) |
| Model | 548 |
| Dehumidification capacity | 455 |
| Total heating capacity | Ribbed tube & Hydrophilic aluminum foil |
| Total Cooling Capacity | Ribbed tube & Hydrophilic aluminum foil |
| Evaporator | Double process & Titanium coil heat exchanger |
| Condenser | 3 |
| Pool condenser | Type | / | 56.6 |
| Quantity | Set | 61 |
| Water flow rate | M3/h | DN125 |
| The pressure drop | (kPa) | SCROLL |
| Pipe size | (mm) | R407C / R410A |
| Compressor | Type | / | 3 |
| Refrigerating | / | 28.5 |
| Quantity | Set | 69 |
| A single power | (kW) | Centrifugal fan |
| Maximum operating current per unit | (A) | 2 |
| Air return system | Fan type | / | 58000 |
| quantity | Set | 400 (100~800 Customize) |
| The standard air volume | M3/h | Three-Phase Asynchronous Induction motor |
| The standard air pressure | (Pa) | 2 |
| The Motor type | / | 11 |
| Number of motors | Set | Centrifugal fan |
| A single power | (kW) | 2 |
| Air supply system | FanType | / | 58000 |
| Quantity | Set | 400 (100~800 Customize) |
| The standard air volume | M3/h | Three-Phase Asynchronous Induction motor |
| The standard air pressure | (Pa) | 2 |
| The motor type | / | 11 |
| Number of motors | Set | Smooth pipe & Hydrophilic aluminum foil |
| A single power | (kW) | 320 |
| Surface air cooler | Surface air cooler | / | 55.0 |
| Cooling Capacity | (kW) | 69 |
| Water flow rate | M3/h | 500 |
| The pressure drop | (kPa) | 42.0 |
| Heating capacity | (kW) | 28 |
| Water flow rate | M3/h | 380/3~/50 |
| The pressure drop | (kPa) | 134.9 |
| Dehumidification heat pump unit(Indoor whole unit) | Power Supply | (V/Ph/Hz) | 7200x2750x2600 |
| The standard power | (kW) | 5300 |
| Dimension | (L/W/H) | At the top of the wind |
| Weight | KG | 3 |
| Outdoor Air-cooled condenser(Optional unit) | The direction of the wind | / | 380/3~/50 |
| Quantity | Set | 2.65x2 |
| Power Supply | (V/Ph/Hz) | 1-1/8"x7/8" |
| A single power | (kW) | 1990x1030x1370 |
| Diameter of pipe | (inch) | 280 |
| Dimension | (L/W/H) | shell & tube type (The unit of built-in) |
| Weight | KG | 97.0 |
| Water cooled condenser(Optional unit) | Type | / | 32 |
| Water flow rate | M3/h | DN150 |
| The Pressure drop | (kPa) | 29 |
| Pipe Size | (DN) | DN125 |
| Note: 1. Ambient temp.(DB/WB):28ºC/26ºC, Water temp.(In/Out):26ºC/28ºC |
| 2. cold and hot waterSurface air cooler( Cooling/heating coil) : cold water inlet and outlet temperature 7/12°C, hot water inlet and outlet temperature 60/50°C; |
| 3.When the refrigerating capacity or adding heat is insufficient, cold and hot waterSurface air cooler can be selected to provide additional cooling capacity and heat. |
| 4.When ordering, please specify the options required, such as air cooled condenser, outdoor water cooled condenser |
| 5.The above parameters are based on Refrigearnt R410A, for parameters based on other refrigerant please contact us. |
| 6.The above parameters may have some differences from the final product because of products updating, so above information is not the provision of any business contract. Please refer to final product label when buy, or refer to us for any information. Our company keeps the right to interpret. |
Address:
No19. Shewang Industral Area. Chunhu Town. Fenghua District, Ningbo
Business Type:
Trading Company
Business Range:
Consumer Electronics
Company Introduction:
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
